SOMEONE INVESTED IN LANDERON CHRONO THAT IS RUSTED
LL BEAN HAMILTON
MILITARY
AWESOME GOLD GILDED
RUBY JEWELED
ETA QUARTZ
STEEL CONSTRUCTION
BEAD BLASTED MILITAY NON-GLARE FINISH
ILLUMINATED HANDS & DIAL
DIVERS MILITARY
RE-ILLUMINATION OF DIALDOT MARKERS AT NUMERALS
ALSO HANDS WITH WHITE AF LUMINOVA
ALSO TRIANGLE IN BEZEL
THE ETA MOVEMENT ON LEFT HAS IS TRIPLE THE WORKMANSHIP- EVEN
CIRCUITS ARE GOLD FINISHED
IT INCLUDES A 24KT GOLD GILDED FINISH LIKE BACK IN 17TH/19TH/EARLY2OTH CENT
THE ORIGINAL ONE ON RIGHT IS EXACT BUT FOR ITS THREE INSTEAD OF TWO HANDS
SOME WORK ON CENTER WHEEL BOX FIXED THAT
USING GLASS BEADS I WAS ABLE TO REFINISH CASE AND MATCH BRACELET
\
FOR THIS LANDERON CHRONOGRAPH DUAL SUB DIAL
[SECONDS AND CHRONO COUNTER]
RESTORATION ROCK USED THE FOLLOWING
FOR THIS AWESOME LANDERON I USED THE AWESOME ZENITH 5 JAR CLEANER WITH SOME OF THE BEST
CLEANER RINSE AND POWER PACKED RINSE WITH LUBE FROM OTTO FREI OLD SCHOOL STUIFF FOR A
CHRONOGRAPH
THAT WAS RUSTED TO HELL THE EBAY SELL FRETTED TO INFORNM THE WORD WHAT A GREAT WATCH. ONLY
PROBLEM? PARTS WERE
HELD TOGETHER BY LITERAL RUST. THE MOMENT THEY WERE DISASSEMBLED THAT WAS IT. NO MORE
RE-SCREWING, NO MORE
WORKING AND ONCE PLACED INA ZENISTH 5 JAR OR MY ULTRASONIC THAT WOULD BE THE DEATHNEL. THE
END CAUSE
THE RUST REMOVED WOULD BE THE MORTER HOLDING THE DARN THING TOGETJHRE
THIS 1950’S 4 JAR CLEANER WORKS GREAT
I UTILIZE NON-AMMONIA BASED CLEANERS FOR VINTAGE WATCHES
WHILE UTILIZING A SPECIAL COATING SOLUTION IN THE FINAL RINSES
FOR OUR ULTRASONIC, WE ALSO UTILIZING A SPECIAL COATING IN THE FINAL RINSES
BOTTOM LINE IS THE ENTIRE MOVEMENT HAS A SEMI PERMANENT COATING
BE SURE YOU DO NOT FOLLOW THE INSTRUCTIONS ON SOME OF THE FEW
WATCH REPAIR DVD/CD’S YOU WANT TO COMPLETELY STRIP A MOVEMENT
BUT THERE ARE TIMES YOU WILL REMOVE BALANCE AND MAIN SPRING
AND CLEAN THE REST IN ONE PIECE
|
4 HANDS USE GREEN DO NOT USE THE RED!!!! |
A GREAT SCREW DRIVER KIT IS IMPORTANT |
|
5 SPEED ULTRASONIC |
A MUST HAVE. EVEN WHEN SELLING 5TH TIER WATCHES |
|
CANON PINION TIGHTENER A WATCH RUNS GREAT BUT HANDS DO NOT MOVE |
HAND REMOVERS- I USE THEM FOR TRENCH HANDS |
|
|
|
|
REMOVING RUST-PARTS RUSTED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AFTER FULL STRIP DOWN, HAND |
|
|
|
|
|
|
|
|
|
|
|
|
AS YOU CAN CLEARLY SEE, PARTS ARE CLOSE TO WHILE WE HAVE NO PITTING OR CHUNKING. IT PASSES AND CAN BE TUNED TO OPERATE |
|
|
|
|
|
|
|
|
|
THE THIRSD TIME PIECE IS AN AWESOME ILLINOIS THAT SOMEONE
ATTEMPED TO REILLUMINATE.
THE FACT IS THE DIAL WAS IN FANTASTIC CONDITION YET THEY USED A GREE COLOR MODERN GERMAN
DEVELOPED GREEN
COLOR PHOSPHORUS LUMINOVA. PROBLEM WITH THIS WAS THAT ILLINOISE USED RADIUM. YES IT MORE
THAN LIKELY "GLOWED" GREEN
ALL THE TIME BUT THIS DOES NOT GLOW UNLESS CHARGED BY LIGHT, THUS THE HOB LOOKS BAD. YOU
CAN TELL IT WAS PLACED ON AFTER.
ECTYREMLY BAD AND EFFECTS THE PRICE. THUGH, THE INVESTER MORE THAN LIKELY WAS ABLE TO
RECEIVE TIS BEAUTY AT
A LOWER THAN APPRAISED VALUE DUE TO THIS FACT:, CURRENTLY THE FACT IS A PLATE MUST BE MADE
THAT MATCHS THE EXISTING DIAL. THEN
THE DIAL IS SOAKED TO REMOVE ALLPAINT. A NEW COAT OF PAINT, THEN THE FACE IS BULT. A STAMP
IS USED FOR THE BUTLERS DIAL MATCHING THE OLD
ONE STAMP FOR THE OUTLONED NUMBERS, ANOTHER FOR THE NAMES AND INFO. THEN ONE STAMP FOR THE
WHITE LUMINOVA THAT MATCHES
THE OUTLINED NUMBERS. THAT MEANS LL NUMBERS ARE FILLED AT ONE TIME. THEN THE HANDS ARE
HAND FILLED. WALLAH. LOOKS LIKE IT DID ORIGINSALLY.
WORTH 2 TO 4 TIMES THE VALUE 700 TO 900 APPRAISAL
